Red stains on your render?
Red, pink or reddish-brown staining can be particularly noticeable on pale façades. It is often associated with biological growth encouraged by damp conditions, but appearance alone does not confirm the cause.
Water Marsh assesses the finish, its condition and the affected areas before recommending cleaning. Our approach considers both the visible contamination and factors such as shade, vegetation or repeated water flow.
Recognising common problems
- Red staining
- Green algae
- Black staining
- Traffic grime
- Water marks
Green growth often appears on shaded or damp elevations. Black and dark-grey marks may be biological growth or pollution. Moss, lichen and mould can develop where moisture persists, while airborne dirt gradually dulls the finish.
Streaks below gutters, sills and copings may indicate repeated water flow. Rust from metalwork, bird fouling, paint and graffiti require separate consideration, particularly on coloured or coated surfaces.
Cleaning suited to the render
We assess traditional lime, painted and coloured render, including monocouche, silicone, acrylic, mineral and cement-based finishes. External-wall-insulation and modern thin-coat systems require attention to their condition and manufacturer’s requirements.
Depending on the surface, suitable options may include low-pressure cleaning, soft washing, biological treatments or controlled steam cleaning. We select the least aggressive effective approach for the material and the problem identified.
Aggressive pressure washing is not the default. Excessive pressure or unsuitable products can disturb weak areas, remove coatings or alter the finish. Treatments around windows, metalwork and other adjacent materials also need careful planning.
Address the cause as well as the marks
Cleaning can improve staining beneath a leaking gutter, but it will not repair the leak. Defective rainwater goods, drainage problems and other sources of persistent moisture should be addressed separately to reduce rapid recurrence.
Biological growth can eventually return. Treatment can help delay regrowth, but the rate depends on moisture, shade, weather and the surrounding environment. We do not promise a permanently algae-free façade.
Show us the affected elevations
Send your postcode, overall photographs of each affected elevation and close-ups of the render and staining. Include any cracks, loose areas and access restrictions, plus the render product or manufacturer if known.
We can make an initial assessment from photographs and advise whether a site visit or test area is needed. Contact us for a free, no-obligation quote.
Your questions
Can you clean red staining from render?
It can often be treated, subject to the finish and cause of the staining. We assess the surface before recommending a method.
Will you pressure wash my render?
Not automatically. The render system, its condition and the contamination determine the appropriate process. Some finishes need a lower-pressure approach and a suitable treatment.
Can you clean coloured render?
Potentially, subject to its condition and manufacturer’s requirements. We consider how cleaning products and the process may affect the finish before proceeding.
Will algae return?
It can. Treatment addresses existing growth and may delay its return, but damp or shaded elevations remain susceptible. Resolving leaks and other moisture problems can help.
