Choose a topic below, then open a question for the answer. For advice about your own property, send photographs and your postcode.
Quotes & service areas
Is the initial quote free?
Yes. We offer a free, no-obligation quotation. Photographs are a useful starting point; some projects need a site assessment or test area before the scope can be finalised.
Which areas do you cover?
We work across Surrey, East Sussex, West Sussex, and Hampshire. Send your postcode so we can confirm arrangements for your location.
Can I send photographs instead of completing the form?
Yes. Send photographs by WhatsApp or email them to info@watermarsh.co.uk. Include an overall view, close-ups, your name, postcode and the service required. Include approximate measurements and any access restrictions. Larger, historic or technically complex work may need a site survey before a final quotation.
What is included in the price?
Your written quotation identifies the areas and treatments included. Repairs, repointing, additional stain treatments and other work are included only where specifically stated. Any changes are discussed before proceeding.
How much does building, driveway or patio cleaning cost?
The price depends on the area, material, condition, staining, access and treatment required. Building height, working-hour restrictions and any additional stages also affect the quotation. We price the actual work after assessment rather than promise one rate for every surface.
How long will the cleaning take?
Timing depends on the size and condition of the area, access and the cleaning method. Larger façades and heritage work may require a staged programme. Drying, specialist treatments and any separately agreed re-sanding or sealing can require another visit. We discuss the expected programme with your quotation.
How far in advance should I book?
Contact us early if you need work completed before an event, property sale or reopening. Availability varies; tell us your preferred dates and deadline so we can discuss a realistic booking and any weather-dependent stages.
Buildings & historic masonry
Is DOFF the same as ordinary pressure washing?
DOFF combines high-temperature water with controlled low pressure. The heat plays a central role in cleaning, while conventional pressure washing relies more on water pressure. The proposed method still depends on the material and condition.
Will cleaning make an old building look new?
Cleaning can reveal the natural surface, but age, weathering, previous repairs and colour differences remain part of historic masonry. A uniform or new-looking finish cannot be guaranteed. We use assessment and test patches to agree realistic expectations.
Can you remove every stain or graffiti mark?
Not always. Paint and graffiti may be removed or reduced, but porous brick, stone and paving can retain pigments or shadows. Old coatings and the underlying surface need assessment, and a test area can help establish a realistic finish. Deep staining and weathering may remain; additional treatments are agreed in the quotation.
Do you use chemicals on historic buildings?
The DOFF process uses heated water, but some staining or biological growth may require a separate, suitable treatment. We explain the proposed method and any products before agreeing the work.
Are repairs and repointing included in cleaning?
Only if specifically included in your quotation. Cleaning may expose loose pointing, previous repairs or deterioration that was previously concealed. We discuss any additional work before proceeding.
Can white salt deposits appear after cleaning?
Naturally occurring salts can become visible as masonry dries. Tell us about any history of efflorescence; treatment is included only where specifically stated in the quotation.
Can steam cleaning affect existing paint?
Deteriorated or poorly bonded paint can soften, flake or detach during cleaning. We assess coatings and discuss the intended treatment and its limitations before work starts.
What does professional stone and building cleaning involve?
We assess the surface before choosing how to remove dirt, pollution, biological growth or other contamination. Material, porosity, age, previous coatings and visible deterioration all influence the method. The aim is an appropriate clean that retains sound masonry and architectural detail.
Which stone types and building features can be assessed?
We assess natural stone such as limestone, sandstone, Yorkstone, granite and marble, as well as brick and manufactured masonry. Façades, entrances, steps, columns, carved details, churches, memorials and monuments each need an approach suited to their material and condition. Fragile finishes or lettering may limit what can safely be cleaned.
Do you clean homes, historic buildings and listed properties?
Water Marsh works on residential, historic and commercial exteriors. Period and listed buildings need particular care to retain sound original materials and character. Tell us about protected status, conservation requirements and previous work before the cleaning scope is agreed.
Can cleaning damage masonry, and will you inspect it first?
An unsuitable process can damage stone, brick faces, mortar and coatings. We assess the material, contamination and visible condition before recommending treatment. Fragile, weathered or complex areas may need a site inspection and a different approach, or may be unsuitable for cleaning.
Do you carry out test patches?
Where appropriate, a representative sample area helps establish how the surface responds and what finish can reasonably be achieved. This is especially useful on historic masonry, sensitive finishes and large façades. The agreed result may retain weathering or some staining rather than remove sound material.
What can DOFF remove, and is it suitable for old stone?
DOFF may help remove dirt and biological growth, and some coatings or residues, depending on the surface and contamination. It is not automatically suitable for every old or delicate material. We consider the condition and use trial areas where appropriate; additional stain treatment may be needed.
What is TORC, and how does it differ from DOFF?
DOFF uses superheated water; TORC uses a controlled swirling mixture of air, water and fine granulate. They act differently and may be considered for different deposits or coatings. The masonry, contamination and trial results determine the approach; neither system is a universal answer.
Who should I speak to about permissions for a listed building?
Before arranging cleaning, check the proposed work with your local authority conservation team or conservation adviser. Share any permissions, specifications and restrictions with us. Do not assume that a particular cleaning system means the work is authorised.
Can the work be coordinated with an architect or conservation professional?
Tell us who is overseeing your project and provide the relevant specification. The scope, trial areas, access and sequence can then be discussed with your architect, surveyor, conservation professional or main contractor before work is agreed.
Why is masonry black, green or discoloured?
Dark deposits may be pollution, biological growth or another form of staining; colour alone does not establish the cause. Moss, algae and lichen are influenced by moisture and exposure. We assess the likely source and underlying material before discussing treatment and realistic removal.
Can rust, oil, cement residues or paint spills be treated?
These need different assessments. Rust can recur if its source remains; oil and pigments may penetrate porous surfaces; cement and mortar residues can be difficult to remove without affecting the substrate. Send close-ups and details of the material and spill. Avoid assuming that a product suitable for one surface is safe on another.
Should repairs come before or after cleaning?
The condition determines the sequence. Loose or fragile areas may need stabilising first, while careful initial cleaning can expose defects that were hidden by dirt. Repairs, repointing and restoration are separately scoped; cleaning alone cannot make deteriorated material sound.
Can newly completed building work be cleaned?
Send details of the new material, joints, completion date and residues. Fresh masonry and mortar need careful assessment, and cleaning must respect the material's curing and manufacturer requirements. We discuss suitability and timing before agreeing post-construction cleaning.
Driveways & patios
Can you clean block paving?
Yes, subject to the condition of the paving and joints. We assess these before selecting the treatment.
Will all oil and tyre marks disappear?
Not necessarily. Deep oil and other ingrained contamination may remain. We assess the staining and discuss any additional treatment before agreeing the work.
Are repairs or joint treatments included?
Only where specifically quoted. We assess the paving and joints beforehand and discuss additional work if needed. Loose or deteriorated patio pointing may be dislodged during cleaning. Any repointing, repairs or joint treatments must be separately agreed.
Can you remove patio black spots?
We assess the staining and paving before recommending treatment. Results vary with the material and how deeply the contamination is established.
Do you clean natural stone paving?
Yes. We select the method around the stone, its finish and the condition of the joints.
What does a driveway or patio clean involve?
We assess the paving and joints, select an appropriate method and clean the agreed areas. Particular stains or biological growth may need separate treatment. Cleaning, repairs, joint restoration and sealing are distinct stages, so the quotation should make clear which are included.
Which paving surfaces can be assessed?
Send photographs of your block paving, concrete, natural stone, porcelain, paths or steps. Tarmac, resin-bound and previously coated surfaces need their own assessment. The surface type, condition and any manufacturer instructions determine the method; not all surfaces should be pressure washed.
How is professional pressure washing different from a domestic machine?
Equipment is only part of the process. Water flow, pressure, nozzle choice and technique must suit the surface. We also consider joints, drainage, nearby materials and the contamination instead of relying on maximum pressure.
Can pressure washing damage paving or nearby planting?
Excessive pressure or unsuitable treatment can damage paving, joints and surrounding finishes. Tell us about weak edges, delicate stone, walls, planting and existing defects. We consider protection and adjust the method; unstable or badly deteriorated areas may need attention before cleaning.
Will cleaning remove jointing sand from block paving?
Thorough cleaning can displace jointing sand. The joints should be assessed as part of the job, because jointing material helps support the blocks. Ask about suitable re-sanding and ensure any agreed joint work is clearly included in the quotation.
Is re-sanding available, and when would it be carried out?
Ask us to assess the joints when quoting. Re-sanding is not automatically included in a cleaning-only quotation. Where agreed and suitable for the paving, kiln-dried jointing sand requires sufficiently dry conditions; rain may delay that stage after cleaning.
Can porcelain patios be cleaned?
Porcelain paving can be assessed for cleaning, including its texture, staining and surrounding materials. The joints and any coatings need consideration too. Send an overall view and close-ups so the proposed method can be matched to the installation.
Why is my patio green and slippery?
Algae and other biological growth often develop on damp, shaded paving. Cleaning and suitable treatment can address the surface growth, but drainage, shade and nearby vegetation influence its return. Physical defects and persistent moisture problems need separate attention.
Can tarmac or resin-bound driveways be cleaned?
These should not automatically be treated like concrete or block paving. High pressure can harm a weak or deteriorated surface. We assess the material, condition, previous treatments and relevant manufacturer guidance before discussing a suitable approach.
Can concrete or pattern-imprinted concrete be cleaned?
We assess the concrete, joints, existing sealer and any cracks or worn areas before choosing a method. Cleaning can reveal deterioration already present; it cannot repair a failing surface or restore a worn coating. Any coating or repair work needs a separate assessment.
Preparing for your clean
What do I need to do before you arrive?
Please provide safe access and move vehicles, furniture, planters and other obstructions from the agreed working areas. Tell us about drainage problems, vulnerable fixtures and known defects in advance.
Do you need water or electricity?
An external water supply is normally needed for pressure washing and DOFF cleaning unless agreed otherwise. Some equipment also needs power. We confirm site requirements when planning your project.
Does bad weather affect the booking?
Heavy rain, strong winds or freezing conditions may mean postponing work. We will discuss any changes needed to carry out the job appropriately.
Do I need to be at home during the work?
We can discuss this when booking. Access, water, security arrangements and a way to contact you need to be agreed beforehand. Do not assume access through the house or an unattended visit is included without confirming it.
Will cleaning create mess or splash windows and walls?
Cleaning releases dirt, moss and residues, and spray can reach adjacent areas. We plan protection and the working area around the site, and discuss clean-down as part of the scope. Point out delicate fixtures, openings and anything that cannot be moved.
How is dirty water managed?
Drainage and the type of contamination must be assessed when planning the work. Tell us about drains, watercourses and any known oil or chemical contamination. Any collection, containment or disposal arrangements need to reflect the site and agreed method.
Commercial properties
Can you provide RAMS and insurance details?
Yes. Risk assessments and method statements are supplied where required for commercial projects, and insurance documentation is available on request.
Can you work outside normal opening hours?
Out-of-hours working may be arranged, subject to availability and additional cost. We agree the access arrangements and working window as part of the quotation.
Can the premises stay open during cleaning?
That depends on the areas being cleaned and how people use the site. We discuss segregation, pedestrian routes and temporary restrictions before agreeing the programme.
Do you assess large façades and commercial paved areas?
Yes. Tell us about the building or hard-surface areas, use of the premises, access and operating hours. Offices, shops, managed properties, entrances, courtyards and yards can have different protection and scheduling requirements. The work is scoped after assessment.
What access equipment is needed, and can scaffolding be avoided?
The appropriate access depends on height, reach, ground conditions and the work. Ground-based equipment, towers, scaffolding or a suitable platform may be considered. We cannot promise that scaffolding will be unnecessary before assessing the site and agreeing access arrangements.
After cleaning & ongoing care
Will algae and moss come back?
Regrowth depends on shade, moisture, vegetation and local conditions. Cleaning and suitable treatments reduce growth, but we cannot guarantee a fixed period before it returns.
Can cleaning reveal damage or colour differences?
Yes. Removing dirt can expose existing cracks, previous repairs, loose joints or natural variations. We assess visible concerns beforehand and explain any limitations.
Is gutter clearing the same as cleaning the outside?
No. Clearing removes debris from the gutter channel; exterior cleaning deals with visible surfaces. Tell us which you need so the quote includes the right work.
How often should buildings, driveways and patios be cleaned?
There is no fixed interval. Moisture, shade, trees, traffic, pollution and the surface material affect how quickly dirt and growth return. Assess the condition rather than clean unnecessarily. Tell us whether you need a one-off clean or wish to discuss planned maintenance.
Will re-sanding, sealing or cleaning stop weeds and growth permanently?
No. Windblown seeds, organic debris, moisture and spores continue to reach exterior surfaces. Joint maintenance and appropriate aftercare can help, but neither cleaning nor a sealer provides a permanent guarantee against weeds, moss or algae.
Does paving have to be sealed after cleaning?
No. Cleaning and sealing are separate decisions. An appropriate sealer may reduce absorption or make maintenance easier, but it can change the appearance and is not suitable for every material. Existing coatings, moisture, salts and surface condition need assessment. Ask about suitability; sealing is included only if expressly agreed in the quotation.
When can an agreed sealing treatment be applied?
The surface and conditions must meet the selected product's requirements, including cleanliness, dryness and curing weather. There is no single drying time for all paving. Rain or unsuitable conditions can mean postponing a separately agreed sealing stage.
Can masonry be protected or given an anti-graffiti coating?
A protective coating needs a separate suitability assessment and is not automatically part of cleaning. On stone and brick, consider moisture movement, appearance, existing treatments and compatibility, especially on historic fabric. Ask whether a protective or anti-graffiti treatment is appropriate and available for your project before it is specified.
